20
BA081101-en
3.5 Cross
Member
To increase the lift stability, the runways can be optionally equipped with a cross member.
Once a certain level difference is exceeded, the cross member will automatically disengage to
avoid damage to the lift.
Periodically check the cross member for secure engagement (see illustration below, position 1).
1
Engaged position
2
Partially disengaged position
3
Fully disengaged position
To reinstall the partially or fully disengaged cross member proceed as follows:
Release the catch spring from the disengaged fork head of the cross member. Remove the
hinge pin (including catch spring).
Synchronize the runways.
Place the fork head in the holding bracket and insert the hinge pin.
Secure the hinge pin by locking the catch spring.
Summary of Contents for DUO GN Series
