6
BA363901-en
•
The standard lift version shall not be installed and commissioned in hazardous
locations, outdoors, in moist rooms (e.g. car wash) or outside a temperature
range of 5…40 °C (41…104 °F).
Pos: 17 / Technische Dokumentation/Alle Geräte/Überschriften/ Überschriften 1.1/S/Überschrift 1.1: S icherheitsvorschr iften für den Betrieb @ 6\m od_1174482268953_ 75.docx @ 76826 @ 2 @ 1
1.6
Safety Instructions for Operation
Pos: 18 / Technische Dokumentation/Hebetechnik/- Archiv -/ 36 Säulen-Hebebühnen/ 0001 Säulen-Hebeb ühnen A lle/I nhalte/Inhalt: S icherheitsvorschr iften für den Betrieb Säulen-H BZ_12pt @ 46\mod_ 1481283829688_ 75.docx @ 2797291 @ @ 1
•
Use personal protective equipment.
•
Operation of the lift is permitted only with all protective covers (motor, spindle,
cylinder cover) correctly installed and undamaged.
•
Drive on the lift only when it is in bottom position.
•
Ensure an unobstructed movement of lift and vehicle.
•
After raising the vehicle briefly, stop and check the lift supports for secure con-
tact with the vehicle.
•
Make sure the vehicle doors are closed during raising and lowering cycles.
•
Closely watch lift and vehicle during raising and lowering cycles.
•
Do not allow anyone to stay in lift area during raising and lowering cycles.
•
Do not allow anyone to climb on lift or inside raised vehicle.
•
Comply with the applicable accident prevention regulations.
•
Do not exceed the rated load capacity as indicated on the lift nameplate.
•
Only use the vehicle manufacturer's recommended lift points.
•
Do not use the lift for transporting persons.
•
Lifts with runways: After positioning the vehicle on the lift secure it against roll-
off.
•
Keep lift and vehicle free of tools and parts.
•
Lifts with support arms: Use caution when removing or installing heavy compo-
nents. Center-of-gravity displacement may occur. Secure the vehicle using
lashing straps.
•
Keep the lift and lift area clean. Slip hazard on oily surface!
•
The main switch serves as emergency switch. In case of emergency turn it to
position "0".
•
Protect all parts of the electrical equipment from humidity.
•
Protect the lift against unauthorized usage by padlocking the main switch.
•
Use caution with operating vehicle engines. Danger of poisoning!
Pos: 19 / Technische Dokumentation/Alle Geräte/Überschriften/ Überschriften 1.1/S/Überschrift 1.1: S icherheitsvorschr iften für Servicearbeiten @ 6\mod_ 1174482270640_75.d ocx @ 76850 @ 2 @ 1
1.7
Safety Instructions for Servicing
Pos: 20 / Technische Dokumentation/Hebetechnik/- Archiv -/ 00 H ebetechnik - Alle/Inhalte/I nhalt: S icherheitsv orschriften für Servicearbeiten H BZ_12pt @ 46\mod_1481283945452_ 75.docx @ 2797338 @ @ 1
•
Use personal protective equipment.
•
Service work must be done by authorized service technicians.
•
Turn off and padlock the main switch before doing any repair, maintenance or
setup work.
