16 Series, Model - 2816 4WD
T
urn key switch to start position
until engine starts, but no more
than 10 seconds, then release
the key
. Run engine for two
m
inutes at 1500 RPM.
NOTE:
If the oil pressure indicator stays on after the engine starts, stop
the engine and check the oil level in the crankcase. Add oil if necessary
.
Start the engine, if the indicator is still on, do not operate the engine.
Operating the engine without oil pressure will damage engine bearings
an
d other engine parts. See your dealer
.
IMPORT
ANT
:
1.
If
high idle position is used for starting, adjust the engine speed
contro
l lever to obtain about 1500 RPM as soon as the engine starts.
2.
If the engine starts and then stops, wait for the starting motor to stop
turning before yo
u turn the key switch to ST
A
R
T
position again.
STEP 7
STEP 6
CLUTCH PEDAL
Push the clutch pedal down.
STEP 8
When the engine starts, check
the oil pressure indicator and
charge indicator
.
If the indicators stay on, stop
the engine and find out what is
wrong.
S
T
ART
46
OPERA
TING INSTRUCTIONS
____________________________________________
