14-12
© Copyright Mahindra & Mahindra Ltd.012016
compromised; the clutch operation could be spongy and gear
change harder.
Top-up the recommended clutch fluid till the ‘MAX’ mark or contact
an Authorized Mahindra Dealer immediately.
Carefully clean the cap on the reservoir before you remove it and be
sure no debris fall in the reservoir. Do not keep the reservoir open
for longer than necessary to add brake fluid.
Use only clutch fluid that meets Mahindra specifications. Refer to
the ‘Lubricant and Capacities’ section.
Draining or changing of clutch fluid should always be done by an
Authorized Mahindra Dealer.
14.5.8 Checking/Topping Power Steering Fluid
Check the power steering fluid level at the defined service intervals.
Refer to Maintenance Chart for details.
The fluid level should be checked if a leak is suspected, abnormal
noises are apparent, and/or the system is not functioning as
anticipated. Coordinate inspection efforts through an Authorized
Mahindra Dealer.
Driving a vehicle with power steering fluid below the minimum
mark will damage steering system.
Use only recommended power steering fluid. Do not use other
types of power steering fluids which may damage the power
steering system.
W12N10
The fluid level in the reservoir should be checked on a level
surface with the engine OFF to prevent injury from moving parts
and to ensure accurate fluid level reading.
Follow the below steps for checking and topping up the power
steering fluid;
1.
Start the engine and let it run until it reaches normal operating
temperature
MAINTENANCE
