2-16
© Copyright Mahindra & Mahindra Ltd.012016
A
Rear Jacking Points
B
Front Jacking Points
2.7.1 Jacking
Position the jack at the correct jacking point. Make sure the jack is
positioned on a level and solid ground. Ensure no one is in the
vehicle.
Block the wheel diagonally opposite the flat tyre to keep the vehicle
from rolling when it is jacked up. When blocking the wheel, place a
wheel block in front of one of the front wheels or behind one of the
rear wheels.
A
B
W12B22
A
Flat Tyre
B
Chock Blocks
To raise the vehicle, insert the jack handle end along with the
extension into the jack and turn it clockwise with the jack handle. As
the jack touches the vehicle and begins to lift, re-check that it is
properly positioned. Raise it high enough ensuring the spare wheel
can be installed, but not to raise up above the ‘yellow’ line.
Remember you will need more ground clearance when putting on
the spare tyre than when removing the flat tyre.
R
AISE
Max Limit
(Yellow Line)
LOWER
W12B23
Make sure to set the jack properly in the jacking point. Raising
the vehicle with an improperly positioned jack will damage the
underbody of the vehicle or may allow the vehicle to fall off the
jack and cause personal injury.
•
Use the jack only for lifting your vehicle during wheel
changing
•
Do not raise the jack with someone in the vehicle
•
When raising the vehicle, do not place any objects on top of
or underneath the jack
GENERAL
