45
6.12. BACK GRADING OR DOZING
MATERIAL
When back grading, the angle between the bottom of
the bucket and the ground must not be more than
15 degrees. Failure to follow these instructions could
cause loader tilt cylinders to fail and void warranty.
Never use bucket or other attachment in position
shown when back grading or dozing material. This will
cause excessive pressure in bucket cylinder and will
cause failure to your loader, which is not covered
under warranty.
Never back grade or doze with tractor/loader
combination when bucket or attachment is in this
position.
Do not exceed15°
30°
INCORRECT
Completely Back
35 Series 4WD, Model - 3535 & 4035 Loader June’08
