11 Vehicle Controls
Never try to start the ROXOR without being seated in the
driver’s seat with the clutch pedal fully depressed and the parking
brake set to help prevent a runaway situation in the event the throttle
is stuck.
11.10 Gear Shift Lever
The shift pattern is located on top of the gear shift lever knob. Use
the gear shift lever to shift between forward gears and access
reverse. When shifting gears, always depress the clutch fully and let
up on the accelerator pedal before moving the gear shift lever to the
next gear.
Bring the ROXOR to a complete stop with engine run-
ning before shifting into reverse to prevent gear damage and ease
engagement.
11.11 Transfer Case Lever
The transfer case shift pattern is located on top of the transfer case
lever knob. Use the transfer case lever to switch between 2WD and
4WD operation. 4WD has a Low range and High range.
4WD Low range allows the vehicle to drive at much slower speeds
while still operating within the usable power band / RPM range of
the engine. This also increases the torque available at the axles. Low
range gears should be used during slow speed or extreme off-road
conditions.
Bring the ROXOR to a complete stop with engine run-
ning before shifting the transfer case into 4WD Low Range to prevent
gear damage and ease engagement. The ROXOR can be shifted
between 2WD and 4WD High ranges at any speed.
© 2018 Mahindra Vehicle Sales and Service, Inc. All Rights Reserved.
31
