9 Prepare to Ride
9 PREPARE TO RIDE
Before a ride, the operator should always perform a Pre-Ride Inspec-
tion to confirm the safe operating condition of the ROXOR. Refer to
section
9.1 Pre-Ride Inspection Checklist
. Operator and passenger
must be properly seated, with both side nets latched and doors
closed (if equipped) and seat belts fastened. Wear the appropriate
riding gear. Refer to section
for more information.
Perform a Pre-Ride Inspection before each ride to help
detect any potential problems that could occur during operation. The
Pre-Ride Inspection can help you monitor component wear and deteri-
oration before they become a problem. Correct any problem that you
discover to help reduce the risk of a breakdown or accident.
Always follow the maintenance schedule described in
this Operator’s Guide to also keep your vehicle in safe working order.
9.1 Pre-Ride Inspection Checklist
What to do before starting the engine
l
Check tire pressure and condition. Recommended cold tire pres-
sure is 28 psi.
l
Check wheels for damage and abnormal play. Make sure lug
nuts are torqued to between 71-105 Nm.
l
Check cleanliness of radiator cooling fins.
l
Check engine oil level. Maintain between the two notches on dip
stick.
l
Check engine coolant level. Maintain between HIGH and LOW
lines on the coolant overflow bottle when engine is cold.
l
Check brake fluid level. Maintain between MIN and MAX lines on
the brake fluid reservoir with no pedal pressure.
l
Check clutch fluid level. Maintain between MIN and MAX lines on
the clutch fluid reservoir with no pedal pressure.
l
Inspect the engine air filter, clean or replace if needed.
o
Service engine air filter more often in dusty conditions
l
If you are transporting cargo, respect the maximum rear cargo
weight capacity.
o
Ensure cargo is properly secured in the rear cargo area.
o
Ensure maximum vehicle load capacity does not exceed spe-
cifications. This includes operator, passenger, added
accessories, trailer tongue weight (if applicable), and rear
cargo.
l
Check tailgate is properly latched.
l
If you are pulling a trailer or other equipment, respect the trailer
tongue capacity and towing capacity
o
Ensure trailer hitch and trailer ball are properly secured.
o
Ensure trailer is properly secured to trailer hitch and ball.
o
Limit operation to safe level terrain.
22
© 2018 Mahindra Vehicle Sales and Service, Inc. All Rights Reserved.
