© MAHLE
Sym bols use | ACX11 80 | 5
ACX11 80 | 5
| 5
en
2 .3 Obligat ion
of
c ont rac t or
The contractor is obliged to ensure that all measures geared
towards the prevention of accidents, industrial diseases,
labor-related health risks are taken and measures towards
making the workplace fit for people to work in are carried
out.
Basic rules
The contractor is bound to ensure that all electrical equip-
ment and operating material is set up, modified and main-
tained by skilled electricians only or under the guidance
and supervision of a skilled electrician in accordance with
electrical engineering principles.
Furthermore, the contractor must ensure that all electrical
equipment and operating material is operated in keeping
with electrical engineering principles.
If a piece of electrical equipment or operating material is
found to be defective, i.e. it does not or no longer com-
plies with electrical engineering principles, the contractor
must ensure that the fault is rectified immediately and, in
the event that imminent danger exists, also ensure that the
electrical equipment or the electrical operating material is
not used.
Test s:
y
The contractor must ensure that all electrical systems
and equipment are tested by a qualified electrician or
under the guidance of a qualified electrician to ensure
they are in proper working order:
—
Before starting for the first time.
—
After modification or repair before starting for the
first time.
—
At given intervals. Set intervals such as to ensure
that faults that can be expected to occur are deter-
mined in good time.
y
The test is to take the electrical engineering principles
relating hereto into account.
y
Upon request of the trade association, a test manual is
to be maintained into which specific entries are made.
Liabilit y
All data in this program is based—where possible—on
manufacturer and importer details. MAHLE does not accept
liability for the correctness and completeness of software
and data; liability for damage caused by faulty software and
data is ruled out. Whatever the event, MAHLE liability is re-
stricted to the amount for which the customer actually pays
for this product. This disclaimer of liability does not apply to
damages caused by intent or gross negligence on the part
of MAHLE.
War rant y
Any use of non-approved hardware and software will result
in a modification to our product and thus to exclusion of any
liability and warranty, even if the hardware or software has
in the meantime been removed or deleted.
No changes may be made to our products. Our products
may only be used in combination with original accessories
and original service parts. Failing to do so, will render null
and void all warranty claims.
This product may only be operated using MAHLE ap-
proved operating systems. If the product is operated using
an operating system other than the approved one, then
our warranty obligation pursuant to our supply conditions
will be rendered null and void. Furthermore, we will not be
held liable for damage and consequential damage incurred
through the use of a non-approved operating system.
