en
21| ACX2250| Maintenance
9.6
Flushing after changing type of Oil
When servicing a vehicle, the type of oil in the vehicle's
A/C system should be noted to prevent a cross-
contamination inside the ACX2250. If a PAG system is
serviced and another vehicle with a POE system is to
be serviced next, a flush routine must be performed to
prevent a cross-contamination of the oils.
If the ACX2250 is not flushed the internal hydraulic
system and the vehicle air conditioning system could be
damaged as a result of cross-contamination. MAHLE
cannot accept liability for any such damage.
1.
From the
MENU
, scroll to
SPECIAL FUNCTIONS
and
select. The
SPECIAL FUNCTIONS
screen will now be
displayed.
Fig. 22: Oil Flushing
2.
Follow the menu prompting to complete oil flushing.
9.7
Vehicle Pressure Check
1.
From the
MENU
, scroll to
SPECIAL FUNCTIONS
and
select. The
SPECIAL FUNCTIONS
screen will now be
displayed.
Fig. 23: Vehicle pressure check
2.
This will test vehicle A/C pressures before and after
service
9.8
Unit of measure
1.
From the
SETUP
menu, scroll to
UNITS OF MEASURE.
2.
The user has the option of selecting the units of
measure for:
Weight
Temperature
Pressure
Volume
Fig. 24: Unit of measure
9.9
Clock
Adjustment
1.
From the SPECIAL FUNCTIONS menu, scroll to SET UP and
select DATE and TIME .
2.
The operator can now scroll to the desired date and time
settings.
3.
After selection is complete, press save.
Fig. 25: Clock Adjustment
9.10
Setting language
1.
From the SETUP menu, scroll to LANGUAGE
2.
The user now has the option of seven language selections.
3.
Scroll to the desired language and select.
4.
Press SET LANGUAGE to save your selection.
Fig. 26: Language
Summary of Contents for ACX2150
Page 1: ...MAHLE ACX2180H...
Page 2: ...en 2 ACX2180H...
