en
1
5
| ACX2180 | Equipment installation
6 Equipment installation
6.1
Unpacking ACX2281
Warning – Risk of personal injury!
Incorrect handling could cause equipment to
overturn.
The manufacturer disclaims all responsibility for
damage to objects and/or persons resulting from
the equipment being wrongly removed from the
pallet, or if the operation is performed by
unsuitable personnel, with improper means
protections and without complying with the existing
laws on manual handling of loads and with the
operations described in this manual.
•
Remove staples and remove the carton (Fig. 10)
•
Slowly lower the unit from pallet by means of the rear
wheels (Fig. 12).
Fig. 12: Lowering unit from the pallet
•
Keep the pallet, carton, and scratch protection film for use in
case of a need to return unit.
Fig. 10:
Removing carton
•
Cut straps securing unit to pallet.
•
With 2 people, lift both front wheels by levering with the
handle so unit is setting on the rear wheels (Fig. 11).
Fig. 11: Tilting unit backwards
Important:
Open the cabinet door (use large flat-blade screw driver to
rotate knob at bottom of door) and remove any foam
around the refrigerant tank (typically 2 pieces).
This must be removed in order for the unit to function
correctly.
