background image

|

L A D E N M Ü H L E N

S H O P   G R I N D E R

Always pull the power supply plug out of the outlet before carrying out 
any maintenance or cleaning work on the grinder.

Never put the grinder into service with a defective power supply cable. 
Check the grinder regularly for any signs of damage on the power supply 
cable, plug, finger protector, etc.

Any repairs that may be required are only allowed to be carried out by 
experts. Please contact an authorised customer service centre, your local 
dealer or us directly as the manufacturer.

Do not exceed the permissible maximum operating period of 40 min-
utes. Afterwards, allow the motor to cool off for approx. 30–40 minutes.

When unpacking the grinder, please check to determine whether the 
power supply voltage (volts) corresponds to the grinder voltage on the 
rating plate.

Children do not recognise the risks that may arise when handling electri-
cal grinders; therefore never leave children alone with electrical grinders 
without proper supervision.

Never immerse the grinder in water and do not oper-
ate it with wet hands.

page 4

1. Safety

Please read and observe the following operating 

instructions carefully. Non-observance can re-

sult in damage to the device as well as in health-

threatening risks for the user.

1.1 Symbols

The following two symbols are used in this manual of operating instruc-
tions:

  

Safety instruction:

 

 

In case of non-observance, extreme risk of  

 

  accidents 

exists.

  

General instruction:

 

 

In case of non-observance, the device can  

 

 

 

become damaged or optimum operation not be 

  guaranteed.

1.2 Safety Instructions

The grinder you have purchased is only allowed to be used to grind 
whole coffee beans or the unground material for which the grinder has 
been set up for. Ground materials are never allowed to be filled into the 
hopper.

Do not carry out any modifications or changes on the grinder. In case of 
non-observance, the manufacturer shall be liable for resulting damage 
in no case whatsoever.

Summary of Contents for Kenia

















Reviews: