background image

• 

Decrease the grinding degree only when the grinder is in 

operation.

• 

To avoid/eliminate imbalances when adjusting the grinding 

degree, we recommend that you first set a coarser grind-

ing degree (about one step/unit above the desired grinding 

degree) and only then adjust the grinding degree slider down 

from there to the desired finer grinding degree.

3. 

If required, fix the grinding degree by turning the grinding degree 

lock anticlockwise to the   position (closed) (see 

Fig. F

).

Selecting a recipe on a weight/time basis

 

Turn the controller 

(3)

 to select the desired recipe (see 

Fig. G

).

The symbol of the selected recipe and the corresponding grinding weight 

or grinding time are highlighted in the display 

(14)

.

Assigning a recipe on a weight/time basis

You can use the parameters Weight-based and Time-based to 

define the desired grinding mode, which is then automatically 

executed by the grinder.

1. 

Press the controller 

(3)

 twice to call up the main menu in the display 

(14)

2. 

Turn the controller to select the “Edit recipes" menu item and confirm 

your selection by pressing the controller.

3. 

Turn the controller to select an existing recipe and confirm your selection 

by pressing the controller.

4. 

Select the first menu item “Time-based/Weight-based/Manual” in the 

recipe and confirm your selection by pressing the controller. 

5. 

Select the desired grinding mode (Time-based/Weight-based/Manual) in 

the submenu and confirm the recipe setting by pressing the controller.

E80 GbW | F80 GbW | EN

ESPRESSO GRINDER| FILTER COFFEE GRINDER

24

Summary of Contents for E80 GbW
















































Reviews: