16
CommerCial Coffee grinder
Connecting the potential equalizer
The connection for potential equalization
(12)
is located on the back of the
grinder (see
Fig. B
). The electrical connection and testing of electronic func
-
tionality must be carried out by an electrician.
1.
Loosen and remove the lock nut (see
Fig. E
).
2.
Remove the lock ring and the flat washer.
3.
Connect the potential equalization conductor
(17)
to the potential equalizer.
The potential equalization conductor is not included with delivery.
Use a copper potential equalization conductor with a minimum
cross-section of 10 mm
2
.
If you have questions about this, contact an authorized service
partner or electrician.
4.
Secure the potential equalization conductor by reattaching the nut, flat
washer and lock ring.
Operation
INFORMATION!
Risk of damage!
The operator has no influence on the thermal overcurrent circuit-breaker.
If the thermal overcurrent circuit-breaker has been triggered several
times, a service partner must be contacted for advice as the motor
winding can become damaged.
•
The grinder has a thermal overcurrent circuit-breaker which
interrupts the electric circuit of the grinder in case of electrical
overload. To put the grinder into operation again, first press
the off switch 0
(4)
and disconnect the power plug
(14)
. Then
press the release button
(15)
. You can now plug the power
plug back into the socket and put the grinder into operation
(see chapter "Setting up the grinder").
•
The grinder also has a motor protector, which switches off
the grinder when the motor becomes too hot. As soon as the
motor has cooled down, the grinder can be put into operation
again (see chapter: “Troubleshooting”).
Summary of Contents for EK43 S
