background image

12. Warranty Conditions

1.  The warranty period is 1 year from the date of purchase.

2. The warranty covers all damages that can be attributed to inferi-

or materials or defective workmanship. Corresponding grinders 
will be repaired or replaced free-of-charge, with the exception 
of transport or freight charges. Transport is the responsibility of 
the customer. Therefore, avoid damages with all returns by cor-
rect packing.

3. The grinder may only be opened for cleaning purposes in accor-

dance with the Operating Instructions.

4. This warranty does not cover damages which have occurred 

through: Improper usage, improper maintenance, lack of ser-
vicing, usage for purposes other than those intended, incorrect 
installation, incorrect voltage, breakage, natural wear or for rea-
sons beyond our sphere of infl uence.

5. In order to maintain the warranty, only original spare parts and 

accessory parts may be used.

6. Observe in addition our General Delivery Conditions in their re-

spective current version.

7. The manufacturer is in no way liable for consecutive or secondary 

damages.

8. The warranty does not cover costs resulting from repairs con-

ducted by non-authorized personnel.

|

H O R E C A

G A S T R O   G R I N D E R

11. Certifi cate

 

 

             

 

 

EC Declaration Conformity 

As defined by EMC-directive 89/392/EWG 

           MAHLKÖNIG GmbH & Co.KG                          
     
Tilsiter Straße 142, 22047 Hamburg 

                                                                                                                                                             Telefon : 040 - 69 69 40 - 0 
                                                                                                                                                               
Telefax : 040 - 69 39 721 

 

MAHLKÖNIG GmbH & Co. KG,         Amtsgericht Hamburg HR A 85 074;          Persönlich haftende Gesellschafterin:

 

Beteiligungsgesellschaft MAHLKÖNIG mbH,     Eingetragen Amtsgericht Hamburg HR B 45 324,     Geschäftsführer: Nils Erichsen 
Dresdner Bank AG (BLZ 200 800 00) Kto. 383 780 400                        Postbank Hamburg (BLZ 200 100 20) Kto. 253 89-203 
Commerzbank AG  (BLZ 200 400 00) Kto. 21 10 294                                                                Ust. Id. Nr.: DE 118 37 22 65 

 
 

 

 
 
 

Name of the manufacturer or in the EU residential authorized person: 

 

HEMRO AG 
 

Address of the manufacturer or the authorized person: 

 

Bramenstrasse 11 – CH-8184 Bachenbülach 

 

 

 

announce, that the machine below

 

product type 

: commercial device for food processing 

 
machine description 

: Coffee grinder 

 
machine typ 

: K30 TWIN 

 
 
 
 
is in compliance with the conditions of the Directive of Machines 98/37/EG 
and with the main standards stipulated in the Directive concerning low tension 
73/23/EWG and applies to the national laws that transpose it. 

 
 

Issued in Bachenbülach 

: 01.01.2008 

 

Function of subscriber 

: Managing Director 

 

Name of subscriber 

: Nils Erichsen  

 
Signature  

 

 

 

Summary of Contents for K30 TWIN






























Reviews: