Home Grinder
X54
26
4. When the bean hopper is correctly locked, push the
sliding valve all the way in (see
Fig. E
).
The sliding valve opens up the bean hopper to the
grinding mechanism (position 3).
5. Finally, place the lid
(2)
on the bean hopper.
Removing the bean hopper
1. Pull the sliding valve
(3)
out of its guide in the bean
hopper
(1)
up to the marking (see
Fig. D
).
The sliding valve engages perceptibly in place in
position 2 and closes the bean hopper to the grinding
mechanism.
2. Grind any beans left in the grinding mechanism until
the grinder runs empty ("Emptying").
3. Release the bean hopper locking mechanism by
pulling the sliding valve all the way out of its guide on
the bean hopper (see
Fig. C
).
The bean hopper can only be removed from its
locking mechanism when the sliding valve is in posi-
tion 1 (= pulled out to the maximum).
4. Remove the bean hopper upwards from the bean
hopper intake
(4)
.
When the machine is switched on with the
bean hopper removed, the display shows error
E001 and a grinding process is blocked.
Summary of Contents for X54
