15 Environmentally responsible disposal
27
2. Remove the electronics cover.
3. Remove power cable.
4. Remove fan.
15 Environmentally responsible
disposal
The unit and the packaging contain parts that can
be recycled, and should not end up in the do-
mestic waste. Dispose of the packaging material
and the unit in an environmentally-friendly way, in
compliance with the regulations valid in the coun-
try where you are.
16 Wiring diagrams
ECA 100 ipro, ECA 100 ipro K
• Nominal speed, high level
It is essential to fit a jumper between terminals 1
and 2, otherwise the electric internal shutter will
not open.
• Nominal speed, low level
• 2 speed levels (high and low level)
ECA 100 ipro with STX 1,5 / STSX 2,5
• Speed can be adjusted with STX 1,5 / STSX
2,5
STX 1,5 speed controller - surface-mounted/flush-
mounted, STSX 2,5 speed controller - for distribu-
tion panel installation
S1 on/off
ECA 100 ipro VZC, ECA 100 ipro KVZC
ECA 100 ipro F, ECA 100 ipro KF
ECA 100 ipro H, ECA 100 ipro KH
ECA 100 ipro B, ECA 100 ipro K
Acknowledgements
© Maico Elektroapparate-Fabrik GmbH. Transla-
tion of the original operating instructions. Mis-
prints, errors and technical changes are reserved.
The brands, brand names and protected trade
marks that are referred to in this document refer
to their owners or their products.
