12 Dismantling
25
Fan does not switch
on
Impeller blocked.
Should only be carried
out by a trained special-
ist: Remove cover. Un-
lock internal grille via
locking hook (arrow) re-
move. Check impeller
and clean if necessary.
12 Dismantling
Dismantling only permitted by a qualified elec-
trician.
DANGER Danger to life from electric
shock.
Switch the mains fuse off.
1. Remove covers.
2. Remove the electronics cover.
3. Remove power cable.
4. Remove fan.
13 Environmentally responsible
disposal
The unit and the packaging contain parts that can
be recycled, and should not end up in the do-
mestic waste. Dispose of the packaging material
and the unit in an environmentally-friendly way, in
compliance with the regulations valid in the coun-
try where you are.
Acknowledgements
© Maico Elektroapparate-Fabrik GmbH. Transla-
tion of the original operating instructions. Mis-
prints, errors and technical changes are reserved.
The brands, brand names and protected trade
marks that are referred to in this document refer
to their owners or their products.