VENTILATOREN
FR
EZQ.. B/D/E, DZQ.. B/D
EZS.. B/D/E, DZS.. B/D
DE
UK
4. Only EZQ.. B/EZS B:
Electrically wire capa-
citor [4] to the terminal block (tightening
torque of screws 0.7 Nm). Connect the PE
conductor to the earth terminal (tightening
torque of screw 1.5 Nm).
5. Only DZQ../DZS..:
Connect external control
device (
chap. 5) to the terminal block’s
two TK motor terminals. (Tightening torque
of screws 0.7 Nm).
6. Connect on/off switch (on-site).
7. Connect
.
8. Check that the technical data (
rating
plate) matches.
9. Fit terminal compartment cover [2].
NOTICE:
The terminal compartment cover
sealing must be flush all the way around the
motor. Tighten both screws to a tightening
torque of 1.5 Nm.
WARNING for protective grille removal/
attachment:
Check that the protective grille
is firmly seated and carry out a PE conductor
test
Risk of electric shock.
10. Switch the mains fuse on.
