12
10. Commissioning – continuous
operation
Move operating mode switch [2] into
“Continuous” position.
● Unit switches on. Fan runs at set minimum
speed.
11. Switching off unit
Move operating mode switch [2] into “Off”
position.
12. Maintenance
The unit is maintenance-free.
13. Cleaning
If dusty, clean the unit with a soft, dry cloth.
Do not use cleaning agents.
14. Fault rectification
● Call on the services of a qualified
electrician any time there is a fault!
● Repairs should only be carried out by a
qualified electrician!
DANGER
Danger to life. Unit is powered
up!
Switch the mains fuse off!
Fault
Measure
In the event of a short
circuit or if cable to
temperature sensor is
interrupted, the fan
will run at minimum
speed. Red indicator
light [9] switches on.
Call on the services of
a qualified electrician.
Micro-fuse has
tripped.
Call on the services of
a qualified electrician.
Tab.1: Fault rectification
15. Dismantling
Dismantling should only be carried out by
a trained electrician.
16. Environmentally responsible
disposal
The unit and the packaging contain parts that
can be recycled, and should not end up in the
domestic waste. Dispose of the packaging
material in an environmentally-friendly way, in
compliance with the regulations valid in the
country where you are.
At the end of its service life, dispose of the
unit in an environmentally-friendly way, in
compliance with the regulations valid in the
country where you are.
