background image

4 System and product information

9

• Electrical connection at side or rear. Cable

feedthrough with stepped grommet.

• Can be mounted simply in the shaft with mount-

ing support or the mounting grooves. Accessor-
ies for UPM 60/100 mounting support or ER-MS
mounting grooves (installation kit: 4 hammer
head screws, 4 nuts and 90° brackets).

• Can be screwed directly into the front wall or

ceiling (4 slots in the external frame).

• Mains cable type NYM-O or NYM-J, 3 x 1.5 or 5

x 1.5 mm², depending on the cover variant.

ER EC fan insert

• Fan insert for installation in housing.

• Electrical plug connection for quick installation

in the housing.

• Energy-saving EC motor.

• Motor not speed controllable.

• Air outlet adapter (scope of delivery) for conver-

sion of air outlet towards the rear.

Covers

• Cover with exhaust air filter. Trouble-free filter

change without tools.

• ER-AH and ER-AB: Barrier-free products,

switch on and off automatically.

• ER EC fans with water jet protection for areas 1

(DIN VDE 0100-701).

• It is possible to rotate the cover by ± 5° to com-

pensate for housings which have been fitted at
an angle.

Summary of Contents for ER shell

































Reviews: