Maico ER-UP/G, Mounting And Operating Instructions

7. Product information 

9 

7.4.1 ER-UP housing types 

The 3 recess housing units ER-UP/G, ER-UPD 

and ER-UPB are available for recess instal-

lation. These should be selected to match the 

exhaust air system. The connection diameter 

for all housing types is Ø 75 or Ø 80. 

7.4.2 Recess-mounted housing ER-UP/G 

●

  Plastic housing without fire protection 

equipment. Can be combined with ceiling 

penetration seal. 

●

  Suited to wall or ceiling installation, inside 

or outside the exhaust air shaft.  

●

  Permissible air outlet direction with wall 

installation: upwards, to right or to left. 

●

  Plastic exhaust socket with airstream-

operated plastic shutter, maintenance-

free. 

●

  For connecting second room ventilation 

with knockout points at bottom, on right 

and left. 

7.4.3 Recess-mounted housing ER-UPD 

●

  Can be combined with Maico aeroduct or 

Saint-Gobain-Gussrohr PAM-Global RML. 

●

  Can also be used outside fireproof shaft. 

●

  Housing with maintenance-free fire 

protection shut-off device to prevent fire 

from spreading (K90-18017). 

●

  Suited to wall or ceiling installation, inside 

or outside the exhaust air shaft. 

●

  Permissible air outlet direction with wall 

installation: upwards, to right or to left. 

●

  Metal exhaust socket with airstream-

operated metal backflow preventer with 

soldered strut. 

●

  For connecting second room ventilation 

with knockout points at bottom, on right 

and left. 

7.4.4 Recess-mounted housing ER-UPB 

●

  Housing with maintenance-free fire 

protection shut-off device to prevent fire 

from spreading (K90-18017). 

●

  Housing with fire protection cover for use 

in fireproof exhaust air shafts. 

●

  Suitable for wall or ceiling installation in a 

fireproof exhaust air shaft. 

●

  Permissible air outlet direction with wall 

installation: upwards, to right or to left. 

●

  Metal exhaust socket with airstream-

operated metal backflow preventer with 

soldered strut. 

7.4.5 Fan insert 

●

  Fan insert with cover and exhaust air filter 

for installation in ER-UP/G-, ER-UPD or 

ER-UPB housing. 

●

  Electrical plug connection for quick instal-

lation in the ER-UP housing. 

●

  Fan insert has snap-on attachment for 

easy installation. 

●

  Cover with exhaust air filter. Trouble-free 

filter exchange without using tools. 

●

  It is possible to rotate the cover by ± 5° to 

compensate for housings which have been 

fitted at an angle. 

●

  Filter change without tools. 

●

  For single or second room ventilation 

using a single fan. Exception: H models 

only for single room ventilation. 

●

  F and H model: Barrier-free products,  

as the fan switches itself on and off 

automatically. 

●

  Energy-saving motor with thermal 

overload protection. This switches itself off 

in the event of overheating and then back 

on again automatically after cooling down. 

●

  The fans may be subject to jet water in 

areas 1 and 2 (DIN VDE 0100-701:  

2008-10 and/or HD 60 364-7:2007).