7 Housing installation
27
DANGER Fire may spread if connection
duct is incorrectly installed.
Only use permitted duct material (
Correctly attach connection duct to exhaust
socket.
6. Slide connection duct to stop above exhaust
socket. Secure connection duct and exhaust
socket with 3 steel blind rivets. Then seal well
for ventilation, e.g. with cold-shrink tape.
7. Produce electrical connection.
8. Insert the plaster protective cover in the hous-
ing.
9. Plaster in housing flush with front edge, note
tile thickness if necessary: Important informa-
tion about plastering.
7.17 ER-UPB/R, ER-UPB/L and ER-
UPB/U installation (second room)