7. Product information
8
If the installation deviates from DIN 18017-3:
●
ER-UP fans can also be used as
standalone units.
●
Installation in the wall or ceiling is
permitted.
●
ER-100 fans can be used to extract air
from another room (interior kitchen etc.).
7.3 Permitted exhaust air systems
In accordance with DIN 18017-3, the
following exhaust air systems are permitted
for ER-UP/Centro.
Exhaust air
system
UP housing
ER-
UP/G
ER-
UPD
ER-
UPB
aeroduct fire
protection system
No
Yes
**
No
PAM-GLOBAL RML
cast ventilation
system
No
Yes
**
Yes
***
Ceiling penetration
seal
system
Yes
*
No
No
System with
fireproof shaft
No
Yes
**
Yes
***
Air extraction system
without fire
protection
Yes
*
No
No
*
ER-UP/G can be used inside and outside
the shaft, connection duct made from
flexible aluminium duct, second room
connection made from
flexible aluminium
duct.
**
ER-UPD can be used inside and outside
the shaft, connection duct made from steel
folded spiral-seams duct, second room con-
nection made from flexible aluminium duct.
***
ER-UPB can be used inside the shaft, con-
nection duct made from flexible aluminium
duct, second room connection made from
steel folded spiral-seams duct.
7.4 Combination options
The ER recess-mounted exhaust air systems
described here comprise a UP housing and a
fan insert/exhaust air element with cover.
In the
shell phase
the
ER-UP housing
(ER-UP/G, ER-UPD and
ER-UPB) are installed, wired and provided
with a plaster protective cover.
ER-UP/G and ER-UPD housings can be used
with a second room connection set (ER-ZR)
for second room ventilation. Ensure the right
housing variant (ER-UPB/L, ER-UPB/R or
ER-UPB/U) for ER-UPB housings.
WC seat ventilation at the same time as room
ventilation is possible using the second room
connection of the ER-UP/G or ER-UPD
housings. The Maico extraction socket
ER-AS (Ø 70) should be used for this
purpose and a connection established to
the WC seat.
Final assembly
is undertaken once the
plastering and paint work is complete.
For decentralised ventilation
, an ER 60 or
ER 100 fan insert is placed in the recess-
mounted housing, the exhaust air filter and
cover are fitted.
For centralised ventilation
, a Centro-M or
Centro-E exhaust air element is installed with
an exhaust air filter and cover
separate
Centro operating instructions.
ER 100 units are approved
for second room
ventilation
. The following control types can
be used for this: Standard, VZ, VZ 15, VZC,
G, I, D or RC. Centralised ventilation with
Centro-M or Centro-E exhaust air elements
is possible in combination with ER-UP/G
housings under certain preconditions
chapter 12.1.1.
ER 60 units are not permitted for the
second room connection.
For ER radio fans and Maico smart
ER 100 RC instructions.
