9
Mounting the compensating frame
PPB 30 ARE/ARW
– once external wall is fully plastered –
●
Compensating frame
55 mm deep, stackable
●
Use drilling template.
● Drill hole to fit type.
●
Observe the “TOP”
installation position.
1. Remove plaster protective cover, place
drilling template over the wall sleeve, align
it and mark the fixing holes.
2. Drill the holes and insert dowels.
PPB 30 ARE/ARW:
View from rear
3. Securely screw the compensating frames
to the wall at the 4 positions (arrows).
Suitable mounting material is to be
supplied by the customer.
4. Screw the external cover to the compen-
sating frame with the provided screws.
For PPB 30 AE/AW or PP 45 AK/AE/AW,
use additional fixing plate PPB 30 ARE BB/
ARW BB.
PPB 30 AK + PPB 30 ARE/ARW
PPB 30 AE/AW + PPB 30 ARE BB/ARW BB
+ PPB 30 ARE/ARW
