For Questions Regarding Installation, Please Contact Main Access Customer Service 1-888-333-1134 or
Info@MainAccess.com
iSTEP
Model #200601T Assmebly Instructions
Step 21: Pool Installation
Step 22: Deck Mount Installation
*Optional* Purchase (2) Anchors (#200888) to weigh
down the iStep. Sand not inlcuded.
All Finished!
Note: Two people are required for installation.
A total weight of approximately 100 lbs. is
required to keep the step from moving once in
place under water. With the assistance of another
person, carefully place the step in the pool. Place
the two sealed bags of sand (not included) in
ballast bags (M) over the ballast tray (D) to hold
the step in place. Walk step back againast the pool
wall to prevent swim behind hazards.
With the step in position close to the pool wall,
slide the deck connectors (H) intstallation position
on either the pool top seat or pool deck. Secure to
the deck with two #8 x 1" screws (N). Use a
minimum of two screws per deck connector.
Secure each deck connector (H) to each upper
handrail (E1) by using a single #8 x 1" screw.
