Operating the pellet boiler
18
8
Operating the pellet boiler
The pellet heating system is an automatic heating system. All pellet feed system and combustion system sequences are
regulated automatically using an electronic boiler controller and heating controller.
8.1 Operating the heating system
Damage caused due to incorrect operation or incorrect
settings.
Only trained operators may use the heating system.
Make sure no unauthorised persons enter the central
heating room. Keep children away from the central heating
room and storage room.
Property damage
The allowed temperature of the boiler controller is 40 to
122°F.
Fire risk
Keep the ash removal door closed while the boiler is in
operation.
8.2 Description of the control panel
The control panel is located underneath the flap above the door of the boiler.
Note
Summer/winter switch does not
exist
with an integrated
Pelletronic
heating controller
1
Operating device
Operates the boiler controller and the heating controller.
2
Main switch
Switches off the heating system including the power supply to the control panel.
3
Safety
temperature sensor
Switches the heating system off if the boiler temperature reaches 203°F. The heating
controller remains active.
4
Summer/winter
switch
0 – Summer:
boiler operates if the connected domestic hot water thermostat is closed.
1 – Winter:
boiler operates on the adjusted boiler temperature.
Operating Manual PE 12-32
PE 149 USA 4.1
Summary of Contents for Pellematic PE 12-20
Page 21: ...Operating the pellet boiler 21 Setting date and time PE 149 USA 4 1 Operating Manual PE 12 32...
Page 32: ......
Page 33: ......