PRODUCT WITH 5 PROGRAM
MODES
Your winder is equipped with different modes of operation. Each one id.
5 PROGRAM MODES
While all modes should work for your
watch, your winder is equipped with
multiple wind settings that enable a
more finely tuned experience better
suited to your timepieces.
Mode 1: Winder is off.
Mode 2: Winder rotates clockwise for 2 minutes, rests for 6 minutes, then
repeats the cycle.
Mode 3: Winder rotates counter-clockwise for 2 minutes, rests for 6
minutes, then repeats the cycle.
Mode 4: Winder rotates clockwise for 2 minutes, rests for 6 minuter, then
rotates counter-clockwise for 2 minutes, rests for 6 minuter, then
repeats the cycle.
Mode 5: Winder rotates clockwise for 5 minutes, counter-clockwise for 5
minutes, repeals this cycle for 3 hours, then rests for 9 hours
before repeating the entire cycle from the beginning.
SELF-STOP SWITCH
I: When the door is open the motors will
stop working and trays will stop
moving. When the door is closes all the
motors work and the trays will start
revolving.
O: The product is off. Even if the door is
closed, it will not run.
SELF-STOP
SWITCH
POWER
SWITCH
POWER SOCKET
DC 3V OR 5V / IN
LIGHT
SWITCH
OFF
MODE 1
MODE 2
MODE 3
MODE 4
MODE 5
5
