Page 17
12
Please call for replacement parts or assistance: 1-888-568-3818
Young Chain Company Limited
ASSEMBLY
LONG ROUND
HEAD SCREW
×16
8
1. Use LONG ROUND HEAD SCREW ( 8 ) to attach the LEG ( O ) to the pilot holes on
BASE ( B ).
2. Insert the bolt of the
MIDDLE LEG
( P ) into the corresponding hole of the BASE ( B )
as shown in below figures.
3. Use a hand to tighten the MIDDLE LEG ( P ) clockwise.
**
Repeat these steps for all the four legs.
Note: Use the adjustable levelers to level the
Modern 6 Drawer Dresser
if needed.
Leveler
