18
Assembly Instructions
19.
Ask for assistance to stand the unit upright and position at the desired location.
20.
Insert the assembled drawers into the frame. Extend the Ball Bearing Slide Tracks on the Side Panels (A
and B) all the way forward (including ball bearing cart). Then align the slide runners on the drawer side
panels with the slide tracks and push the drawer carefully inside until it stops.
NOTE: If the drawer does not go in smoothly, please take it out and repeat the step. If you need to
remove the drawer, please pull the drawer all the way out, then simultaneously push the plastic release
lever of the ball bearing slides up on one side and down on the other side, and then pull it completely out.
21.
Plug four Cam Lock Covers (12) into the cross slot of the Cam Locks on the top of the Side Panels (A
and B) to conceal the cam.
A
B
L
L
12
Cam Lock Cover
(4 used in this step)
⑫
