background image

User Manual

Electrical

•  Please ensure that the required voltage is being supplied at all times.
•  The unit should be plugged into a grounded and properly-sized electrical outlet with appropriate over-current 

protection. Please refer to the electrical requirements on the unit's nameplate.

•  The unit should have its own dedicated outlet.
•  Do not use extension cords.
•  Ensure the unit is not resting on or against the electrical cord.
•  If the unit is not in use for a ling period of time, please unplug the unit from the outlet.
•  To avoid shock and fire hazards, do not plug in or unplug the unit with wet hands.
•  After unplugging the unit, wait at least 10 minutes before plugging it back in. Failure to do so could cause damage 

to the compressor.

Temperature Controls

ADJUSTING THE TEMPERATURE 

Your new refrigerator is already factory-set to run at optimum temperatures for food safety and should require no 
adjustments. 
Refrigerators are set to cycle between a minimum temperature of 33 degrees Fahrenheit and a maximum temperature 
of 40 degrees Fahrenheit.  
Adjusting the temperature changes the minimum temperature your unit will run at. Your unit will not run constantly at 
this setting. To change it, follow these instructions:

DIGITAL CONTROL UNITS

1.  Hold down the menu button  

  for 3s, (At this time, the display screen 

displays “--”, then background button lights up)

2.  Select   

  button and click; At this time, enter temperature setting 

interface, the display screen displays the current set value

3.  Adjust the downtime temperature value used by the user pressing  

 " " 

  ". 

4.  After the adjustment, click the menu button  

  to return the menu 

selection interface;

5.  Wait for about 7s, the digital display will automatically save and exit, and 

return to the normal display interface.

Mainstreet Equipment

5

Summary of Contents for 829GMC12B









Reviews: