IT
16
3.3.
Remote control optional
In addition to the standard commands, also there is provided a remote control. The radio control is to be
understood as an optional command in that it is a control method suitable for the machine only for
environments with no radio interference.
The following are the functions associated with the remote control buttons.
Button
Drive
TO
Press and hold the button to get the screen climb.
Releasing the button stops the column in position.
If you keep the button pressed, the column stops automatically
once it reaches the maximum extension.
B
Press and hold the B button for the descent of the screen.
Releasing the button stops the column in position.
If you keep the key pressed, the column stops at the maximum
closing automatic once reached.
3.4.
Procedure coupling between transmitter and receiver
The remote control which accompanies the machine in your possession has been coupled
and
tested
during assembly and is already functional.
Where it is required a new remote control or in case of replacement of the battery, it will be necessary to re-
coupling the transmitter and the receiver.
-
Press the RF receiver reset button using a pen or similar and hold.
-
Press the remote control button to activate it.
-
Release the reset button.
Figure 11: Pairing the remote control
Figure 10: Radio
