MP1800-10 3G Router User Manual
Maipu Confidential & Proprietary Information
Page 25 of 95
After ticking “
Enable standby account
”, the basic setting interface of the dial
interface is as follows:
Basic setting of mobile network
Main Account Recovery Time
: After setting standby account dialing
successfully, restore the dialing interval of the master account. The unit is
minute; the default value is 600 minutes; 0 means not to restore the
master account.
Re-dial Count
: Set the re-dialing times of each account. By default, it is
three times. 0 means always trying to use the master account dialing and
do not use standby account.
APN
: Specifies the APN (Access Point Name) of the backup mobile carrier;
User name
: Set the user name used by dialing (it can be got from the
network provider). The maximum length is 128 bits.
Password
: Ser the password used by dialing (it can be got from the
network provider). The maximum length is 128 bits.
2.
Link Type
Set link connection mode, including online forever and dial on demand.
Enter
Network
>
Dial interface
>
Link type
and you can see the
configuration interface of the link type:
