MP1800-10 3G Router User Manual
Maipu Confidential & Proprietary Information
Page 36 of 95
Prompt
1.
If you do not need to modify the LAN IP of MP1800-10 router,
you can jump over the LAN setting.
2.
If you modify the factory LAN IP of MP1800-10 router, you
need to return to Chapter 3 to re-configure the computer and
re-log into MP1800-10 router.
Forwarding Mode
Forwarding mode is used to set the forwarding mode of the packet to be
based on route searching or IP address pretending. Enter Network >
Forwarding mode, and you can see the following configuration interface:
Forwarding mode setting
Route mode
: Decide the forwarding path by searching for the system
route table.
NAT mode
: Perform the source address pretending for the packet to
realize the requirement of LAN sharing one IP for accessing Internet.
Caution
In the application environment of dialing for Internet, the recommended
forwarding mode is NAT mode, which can reduce the configuration for the
route table.
Dynamic Domain Name
DDNS is short for dynamic domain system. DDNS protocol provides the
querying function between the dynamic IP and domain name. With
MP1800-10 router, you can access LAN internal mapping to the services
on the dynamic IP quickly.
Enter
Network
>
Dynamic Domain Name
and you can see the following
configuration interface:
