MP1800-10 3G Router User Manual
Maipu Confidential & Proprietary Information
Page 42 of 95
Enable
: Whether to enable the WiFi
function
. If ticking, it is enabled.
WiFi Mode
: Set the
WiFi work mode. You can select b mode, g mode, n mode,
mixed b/g, mixed g/n, and mixed b/g/n.
Country Region
: Select the Country/Region the router is being used in. Different
countries have different regulations. Options are:
-
ETSI (Most of World)
-
FCC (North America)
-
TELEC (Japan)
-
MOC (Israel Outdoor)
Channel
:
Set the WiFi work channel. You can select auto or specify one
channel.
TxPower
:
Select the strength of the signal to be emitted
Name (SSID)
: Set the
access
point name of the wireless network.
Forbid SSID broadcast
: After ticking, the SSID is not broadcast.
Authentication
:
Select the security mode of the wireless network. You can
select OPEN, WEP, WPA, WPA2 and WPA/WPA2 mixed. OPEN means not
encrypting. The WEP encrypted password comprises 5 or 13 ASCII
characters; the length of the WPA, WPA2 and WPA+WPA2 encrypted
password is 8-63. Set the encryption algorithm of WPA, WPA2, WPA/WPA2
mixed encrypting mode. You can select AES, TKIP, and AES+TKIP mixed.
By default, it is AES.
WIFI Key
: Sets the key (password) to access the WLAN AP
Cipher
: Select the encryption method for the transmitted payload. The options
are:
-
AES
-
TKIP
-
AES+TKIP mixed.
Service
The service functions of MP1800-10 router include:
DHCP setting
Hot backup
