MP1800-10 3G Router User Manual
Maipu Confidential & Proprietary Information
Page 43 of 95
AAA configuration
802.1x authentication
PIN code management
Regular online and offline
Disconnection detection
Multi-WAN port service
DHCP Setting
1.
DHCP server
DHCP (Dynamic Host Configuration Protocol) is used to distribute the
dynamic IP address to the network host, so as to make the fussy
configuration become simple and easy. Especially for the large LAN IP
configuration, using DHCP service can reduce the workload of the network
management staff greatly.
MP1800-10 router is inbuilt with DHCP server, letting it provide the
dynamic IP distributing service for your LAN. Enter
Service
>
DHCP
Setting
and you can see the following configuration interface:
DHCP setting interface
Enable DHCP service
: If ticking the item, enable the DHCP service.
Otherwise, disable the DHCO service.
Start IP
: The set start address should be in the same network as the IP
address of LAN port, and cannot be the broadcast address or LAN port
address.
End IP
: The set end address should be in the same network as the IP
address of the LAN port, and cannot be the broadcast address or LAN port
address.
