MP1800-10 3G Router User Manual
Maipu Confidential & Proprietary Information
Page 49 of 95
802.1x main configuration interface
Base Configuration
: The basic configuration of 802.1x, such as enable,
protocol version, and access control mode.
Authentication Server List
: You can configure multiple authentication
servers. When one authentication server fails, the time of switching to the
next authentication server is 6s.
Accept MAC List
: Configure the accepted MAC address. The host in the
list can access the network resources without authentication.
Deny MAC List
: Configure the refused MAC address. The host in the list
cannot access network resource without passing authentication.
Basic configuration of 802.1x authentication
Enable
: If ticking, enable the 802.1x authentication.
NAS ID
: The ID of the RADIUS client.
Control Mode
: Set the
802.1x access control mode, including port (port-
based) and mac (MAC-based) access control mode. In the port mode, as
long as one port passes authentication, all devices of the port can access
the network resources via the port. In mac mode, each device cannot
access the network resources unless passing the authentication.
Authentication server configuration interface
Server IP
: Configure the IP address of the authentication server.
