Maipu In-Wall AP Series User Manual
Maipu Confidential & Proprietary Information Page 16 of 34
CPU Threshold
: specifies the CPU alarm threshold.
Memory Threshold
: specifies the memory alarm threshold.
2.3.5 Network Detection
On the detection interface, you can detect the network connection status
(
ping
test is used here.
)
, as shown in Figure 2-11.
Figure 2-11 The ping detection interface
(1)
Detection Address
: specifies the target host for the system sending
the ICMP packet.
(2)
Detection Packets
: specifies the number of ICMP packets sent by the
system. The number must an integer from 1 to 10.
(3)
Detection
: notifies the system to begin to send the ICMP packet.
Figure 2-12 The result of network detection.
2.4 Wireless Configuration
2.4.1 Wireless Parameter
On the
Basic Settings
interface, you can configure SSID, network band, and
network channel of the AP.
Choose
WEB Management
>
2.4 GHz
WLAN
>
Basic Settings
to enter the
Basic Settings
interface, as shown in Figure 2-13.