S12800 Routing Switch Installa
tion Manual V1.0
Maipu Confidential & Proprietary Information
Page 41
4.1.2 Set PC HyperTerminal Parameters
The following takes running Windows XP HyperTerminal on the PC (or laptop) as an example to
describe the setting of the serial interface parameters of the PC (or laptop).
Step 1:
Enable the PC (or laptop), select Start > All Programs > Accessories >
Communication > HyperTerminal, and click
to set up the new connection
as shown in Figure 4-5. If it is the first time to set the Hyperterminal, the
system displays the interface of Location Information, as shown in Figure 4-
3. Fill in according to the red indication in the fiugre and click OK.
Figure 4-3 “Location inf
ormation” interface
Step 2:
Display the following Telephone and Modem interface and click OK.
Figure 4-4 The Telephone and Modem interface
Step 3:
Display the following Connection Description interface, and fill in the name in
Name (N), such as test, and click OK.
