S3100 Install Manual (For SM3100-28TC-AC and SM3100-52TC-AC) V4
.0
Figure 2-3 Attaching power cable to MyPower S3100 switch
1.
Insert one end of the power cable provided in the accessory kit into
the power socket in the back panel of the switch, and the other end to
the power source socket with overload and leakage protection.
2.
Check if the Power indicator lamp in the front panel of the switch is on.
MyPower S3100 is self-adjustable according to the input voltage. As
long as the input voltage is in the range printed on the switch back
panel, the switch can operate normally without extra adjustment.
3.
The switch will implement self-testing when powered on.
Caution
The input voltage must be within the required range, otherwise the switch
could be damaged or operate abnormally. If after being powered on, the
Power indicator lamp is still off or the self-testing is incorrect, please
contact your provider or the client-service center. Do not open the switch
without permission, to prevent accidental loss or physical injury.
Maipu Confidential & Proprietary Information
Page
19
of
19
