Page 12 of 17
4 To Use the Camera for Taking Pictures ONLY
4.1 Enter Picture Mode
If you want to use the camera to take pictures only (not record), then you can change it to the
Picture Mode. To enter the Picture Mode, press
Mode
button to switch to Picture Mode. In
Picture Mode, you can see a camera icon like this
located to the top left corner of the
screen.
Note: If camera is in Recording Mode and it is recording (the red dot
blinking on top left
corner), press REC button to stop the recording first, and then press Mode button to go to
Picture Mode.
4.2 Take Pictures
Under Picture Mode, you can press
REC
button to take pictures. (Up to 50 pictures can be
taken)
4.3 Enter Menu for Picture Mode
To access the menus for Picture Mode, press the
Menu
button once when you are in Picture
Mode to bring up the menu.
Picture settings
Menu Options
Available options
Picture Resolution
[4M (2688x1512 16:9)/ 9M (4000x2250 16:9)/13M (4800x2700 16:9)]
Image Quality
[Super Fine/ Fine/ Normal]
Date Stamp Setting
[On/Off].
Whether the picture/photo will come with date/time display or not.
