MIEN5208 Series Managed Industrial Ethernet Switch
- 29 -
to log in and modify the machine. The password is fixed to "admin" and the
password is the last six digits of the local MAC address. (If you don't know the
MAC address of this machine, you can log in as a guest first)
The login password must be a legal character consisting of 4-12 English letters
(case sensitive) and numbers. When changing the password, you need to
enter it twice. You must ensure that the passwords entered twice are
consistent.
User name:
The local user name is fixed to “admin” and cannot be
modified.
New password:
Set the user password of this group, which consists of
4-12 English letters (case sensitive) and numbers.
New password confirmation:
Enter the password repeatedly to prevent
the password from being entered incorrectly.
Attention:
1. This page modifies the password of the ordinary user;
2. For security reasons, it is recommended to modify the default
password after the first login;
3.Every time the user logs in to the web server, the server will invalidate
the valid login authentication in about 5 minutes. At this time, the operation of
the web page will re-request the user to log in. This is to prevent others from
using the web when the administrator is absent. Misuse, this time is the
software calculation time, not very accurate.
4.7.3. System information.
Equipment model:
The model number of the switch.
Device Name:
The user can customize the name of the switch.
Device platform:
The name of the manufacturer platform, which is not
configurable by the user.
Device number:
The factory number of the switch.
4.7.4. System management
This page can perform some system operations on the switch, including
restarting, restoring the factory configuration, and upgrading. It is
recommended that users use it with caution. Improper operation may damage
the switch.
Device restart:
This function is used to restart the switch. Before the
switch is completely restarted successfully, the switch does not work and
cannot forward any data packets. This kind of restart is different from the
hardware reset of power-on and restart, except that the switch system software
is reset, just like the "hot boot" of the Windows operating system. The biggest
