MIEN6208 Series Management Industrial Ethernet Switch
- 1 -
1. Introduction
1.1. Product description
Wuhan Maiwe industrial ethernet switch is specially designed for industrial
high speed communications network. The management switch provide the
advanced industrial ethernet solution,which makes the industrial
communications more fluent,dependable and fast.
To satisfy different request,the Maiwe management switch series can be
used for both simple hot-plug function and complicated Web-management
function.
The product provides 2 fiber 6 copper ports , 4 fiber 4 copper ports and 8
copper port models for users to choose, among which the fiber port is
100Base-FX
Single-mode or multi-mode optical fiber interface, the copper port is
10Base-T/100Base-TX Ethernet RJ45 port, each RJ45 port has self-adaptive
function, which can automatically configure to 10Base-T or 100Base-TX state
and full-duplex or half-duplex operation mode,
It can automatically connect MDI/MDI-X. All ports support fast ring network
redundancy function, and the ring network is redundant when the system fails.
The remaining switching time is less than 20mS.
The
Mwring
technique is designed and developed for industrial
application by Wuhan Maiwe. It can resume the ethernet communication
network in 20ms after the interregnum. By this technique the MIEN6208 switch
can construct the ring network by any optic or RJ45 port to provide faster
restoration speed and communication bandwidth.
1.2. Product characteristic
1.2.1. Industrial network performance
Ring technology based on Mwring self-recovery technology link
redundancy
Embedded Web server, through remote management and configuration
of the browser
Trunk port aggregation
Real-time monitoring of broadcast storm control
Online firmware update
Multicast capabilities to support dynamic IGMP Snooping, multicast
traffic filtering
Optional 100Base-FX different distances, different types of optical
interface
