MISCOM7028GX/MISCOM8028GX Series Industrial Ethernet Switch
- 1 -
1. Introduction
1.1. Product Introduction
MISCOM7028GX/MISCOM8028GX is Layer 3 Full Gigabit Industrial
Ethernet Switch manufactured by Wuhan Maiwe Communication Co., Ltd,
which is specifically designed and developed for core layer application in
industrial communication network filed. The series of switches provide a
high-end industrial Ethernet communication solutions for complicated industrial
application requirements, making the industrial communication more reliable,
smother and faster, meeting the constantly innovation requirements for
customers in terms of added value application.
MISCOM7028GX/MISCOM8028GX with 10/100/1000Base-T Ethernet
port supports both half-duplex and full-duplex work mode, as well as
adaptive-negotiation mode, which is capable of interactively negotiating with
other network equipment and confirm operating method and rate, simplifying
the system configuration and management. The series of switches provide
multiple management methods, inclusive of CLI thru hyper-terminal’s access to
switch, Telnet management system, SNMP management software, and other
network monitoring protocols such as LLDP, SNTPv4, and DHCP. This layer 3
Industrial Ethernet Switch also supports multiple advanced management
functions, such as MSTP, VRRP, IGMP, IGMP Snooping, RIPv1/v2 and OSPF
v1/v2, Static routing, VLAN, GVRP, QoS, Trunk, Rate limitation, Broadcast
storm suppression, ACL, Port mirroring and other common advanced
management functions. In terms of device management, it supports FTP/TFTP
upgrade, Syslog recording, Syslog uploading, and Power failure alarm. In
terms of structure installation, it’s a rack-mounting type switch with flexible
choice of rack-mounting or desktop installation.
The rack-mounting Industrial Ethernet Switch is equipped with 28 Gigabit
ports, including 8 Gigabit combo ports and 20 Gigabit FX ports. All ports
support 802.1Q VLAN, minimum rate limitation of 64Kbps, 16K MAC table size,
4K VLAN, 512 IGMP Groups, L2/L3 Ipv4 and Ipv6 packets forwarding at full
speed.
1.2. System Features
1.2.1. High-Performance Full Gigabit Industrial Ethernet Switch
28 Gigabit Ethernet ports, flexible networking mode provided.
Gigabit SFP interface, support hot-swappable LC FX port module and
RJ45 TX port module.
28 Gigabit SFP FX ports (8 combo ports, with FX or TX port optional
