MISCOM7028GX/MISCOM8028GX Series Industrial Ethernet Switch
- 2 -
configuration).
Redundancy technique failure recovery time less than 20ms, enhance
the reliability of system communication.
Support VLAN based on IEEE802.1Q, number 4094.
Support EAPS, MSTP, VRRP and other multiple redundancy protocols.
Support Static Routing, RIP v1/v2 and OSPF v1/v2 and other multiple
dynamic routing protocols.○1
Support IGMP, PIM-SM, and PIM-DM and other multiple multicast
protocols.○2
MAC table size 16K.
Support sophisticated QoS strategy and multiple Queues scheduling
algorithms.
Support SNMP, PMON, Telnet and other multiple network management
protocols.
Support CLI thru hyper-terminal’s access to switch.
Support hardware ACL function, L2-L7 layer data filter.
Support IGMP Snooping detection.
Support broadcast storm suppression.
Support full-duplex and half-duplex mode flow control.
Reliability: MTBF ≥ 50,000 hours.
Support power alarms, port alarms, and ring alarms.
FTP/TFTP-based online software upgrade allowing users easily manage
and update equipment.
Switch with graphical network configuration and maintenance functions,
remotely monitoring the running status and performance of network, providing
network fault monitoring, diagnosis, location and alarm capabilities.
Note: MISCOM7028GX Series DON’T support function○1 and ○2
1.2.2. Industrial Power Supply Design
Support redundancy dual power input: AD220 (85-264VAC/110-370VDC),
single power supply, redundant power supply, flexible choice for customer.
Solid exterior design
The efficient heat dissipation surface design without fan of the aluminum
alloy housing makes it possible to operate the system steady in the
environment of -40
℃
to +70
℃
High-strength enclosed aluminum alloy housing with IP40 protection
allows the system to work reliably in harsh and dangerous industrial
environments.