Majella IMPLEXUS, User Manual

BIAS

The BIAS section allows you to clip and fold the signal asymmetrically. The BIAS section  
offers three bias controls: BIAS, OSC MOD and LFO AMT. We will detail them one by 
one:

BIAS
The BIAS control sets the amount of offset given to the signal coming from the wave-
shaper

OSC MOD
The OSC MOD (oscillator modulation) control sets the amount of modulation from the 
BASIC GENERATOR to the BIAS parameter.

LFO AMT
The LFO AMT (low frequency oscillator amount) control sets the modulation amount/
depth from one LFO to the BIAS parameter. The LFO source (LFO 1 or LFO 2) can be 
selected using the toggle switch.

BASIC GENERATOR

The BASIC GENERATOR is a Voltage-Controlled Oscillator, which produces a sine, saw or square wave signal. The  
BASIC GENERATOR offers the following controls: 

PITCH CONTROL

The complex generator offers two pitch control 
knobs ,RANGE and FINE. We will detail them one by 
one:

RANGE
The  RANGE control selects lowest note for 
the complex generator in steps of exactly 
one octave.

FINE 
The  FINE control tunes the complex 

generator and is continuous so you can fine-
tune its pitch.

WAVE SELECT

The basic generator offers three selectable waveforms, which can be selected using the three-way rotary switch.   

MODULATION SOURCE

The basic generator is a very accurate, but basic voltage-controlled oscillator that can be used 
in combination with the voltage-controlled filter to create your basic synthesizer sounds. This,  
however, is not the main purpose of the basic generator in IMPLEXUS. The basic generator can be 
used as a modulation source for multiple parameters of the complex generator. Modulating these 
parameters at audio rate in different tunings and octaves will result in interesting and unique 
sounds.

MAJELLA  

ENGINEERING

IMPLEX

MADE IN THE NEHTERLANDS

Sine (no Bias)

Folded (no Bias) 

symmetrically

Folded (with Bias) 

asymmetrically

21

20.