Majestic Appliances MJ-9000V, Owner'S Manual

 Majestic LLC © 01/01/2006

Inspecting

WHEN TO REMOVE SHIPPING BOLTS!

WARNING!!! TIPPING THE MACHINE TO POSITION IT FOR USE 
MUST BE DONE WITH THE SHIPPING BOLTS STILL IN THE 
MACHINE! 
TIPPING THE MACHINE WITHOUT SHIPPING BOLTS, CAN CAUSE 
THE INNER DRUM TO IMPACT OTHER INTERNAL PARTS, THUS 
DAMAGING THEM. POSITION THE MACHINE AS CLOSE AS 
POSSIBLE TO IT’S FINAL POSITION AND THEN REMOVE SHIPPING 
BOLTS.

Page 6

√

INSPECT CONTENTS

[  ] Owners Manual 

Brass Pressure Regulators 

[  ] 

(Must be installed on hot and 

cold water inlet. Failure to do 

so can damage the internal 

components and cause water 

damage for which the 

installer/owner will be re- 

sponsible!) 

[  ] Warranty Registration Card 

[  ] Majestic Literature  

[  ] Hoses have washers in 

     both ends.

Brass Pressure 

Regulators 

installed on back of 
appliance.

REMOVING THE FOAM DRUM SUPPORT
     REPLACING THE METAL BOTTOM PAN.

WARNING!!! IN ORDER TO REMOVE THE 
FOAM DRUM SUPPORT AND REPLACE THE 
METAL BOTTOM PAN, THE BOTTOM OF THE 
MACHINE MUST BE ACCESSED. SHIPPING 
BOLTS MUST REMAIN IN THE APPLIANCE 
WHILE ACCOMPLISHING THIS STEP IN THE 
PREPARATION PHASE OF THE INSTALLATION.

ATTENTION: 
 DO NOT TAKE 
OUT SHIPPING 
BOLTS UNTIL 
MACHINE IS 
POSITIONED 
WITHIN A FEW 
INCHES OF ITS 
FINAL INSTALL-
TION POINT. TIP-
PING THE UNIT 
OR MOVING IT 
WITHOUT SHIP-
PING BOLTS  
WILL VOID WAR-
RANTY.