BATTERIA DI BACKUP
ANTENNA
ESTENA
CAVO DI ALIMENTAZIONE
EQ
MUTE
OPEN/
CLOSE
PROG
MEM
0
1
2
3
4
5
6
7
8
TIMER
9
ID3
MONO
STEREO
REPEAT
CLOCK
RANDOM
BAND
PRESET
REC
VOL
SLEEP
FUNC
TASTO POWER / STAND BY
TASTO EQ
TASTO
TASTO PRESET
-
TASTO PLAY / PAUSE
TASTO
SALTA INDIETRO -
TASTO RANDOM
TASTO ID3
TASTO STOP / BAND
TASTO
MONO/STEREO
TASTO TIMER
TASTO PROGRAM
TASTO
SALTA AVANTI / +
TASTO VOLUME -
TASTO FUNCTION
TASTO
TASTO SLEEP
TASTO MUTE
TASTO APRI/CHIUDI
SPORTELLO CD
REC
TASTO REPEAT
TASTI NUMERICI 0-9
PRESA AUX IN
INTERRUTTORE PRINCIPALE (MAIN POWER)
INTERRUTTORE ILLUMINAZIONE
(RILASCIA/PREMI)
PRESA ALTOPARLANTE ESTERNO
INTERRUTTORE ALTOPARLANTE INT. / EST.
PRESA USCITA12V
DISPOSIZIONE COMANDI
16
TURNTABLE
PREPARING TO USE THE TURNTABLE
1. Remove black tie-wrap by untwisting and gently sliding out from TONE ARM .
2. Remove white protective needle cover by gently pulling towards front of unit.
3. Release TONE ARM and hold-down clip by gently pushing to the right. This will unlock tone arm from its ARM REST.
Re-lock the hold-down clip when moving the unit to another location.
TURNTABLE OPERATION
1. Press the
FUNCTION
/
to set the unit to PHONO mode.
2. Set the SPEED CONTROL SWITCH to the correct speed (33 1/3, 45 or 78 rpm) for the selected record.
3. Pull the TONE ARM slightly to the right side until hear the "click" sound to activate the turntable.
4. Move the tone arm over the record and lower it to the point you want the record to start.
5. At the end of the record, the TONE ARM will stop automatically. You must return it to the TONE ARM REST by hand.
ACCESSORY SUPPLIED: Adaptor for 45 rpm records
(if required)
To play a 45 rpm record, remove the adaptor by placing thumb & forefinger in recesses
and pulling it upwards. Then placing it on the SPINDLE. The record can then be placed on the turntable.
EARPHONE JACK OPERATION
Listening through Earphones / Headphones (not included)
CD PLAYER
Playing a CD
1. Press the
FUNCTION
/
to set the unit to CD mode.
2. Press
CD OPEN / CLOSE /
to open the CD compartment
3. Insert a disc with the printed side facing up. Press
CD OPEN / CLOSE /
.
again to close the compartment, READ
is displayed as the CD player scans the contents of a disc.
4. Track no. 1 will be playback automatically after finish the reading CD disc contents.
5. Press
FF
/
or
FB
/
once or repeatedly until the desired track number appears in display.
6. Press
STOP/BAND
/
to stop playback.
CD-MP3 disc playback
1. Insert CD-MP3 format disc. Press
CD OPEN / CLOSE /
again to close the compartment. READ is displayed as the
CD player scans the contents of a disc.
2. Track no. 1 of root folder (Folder 1) will be playback automatically after finish reading CD-MP3 disc contents.
3. Press
FF
/
or
FB
/
once or repeatedly until the desired track number appears in display.
4. Press
PRESET
+
/
or
PRESET
/
to select desired album.
5. Press
STOP/BAND
/
to stop playback.
9
