22
When
“Antenna” is DVB-T:
1.4 DTV Manual Tuning
- Press OK or RIGHT navigation button to enter it.
- Use LEFT/RIGHT navigation button to select the channel.
Then press OK button to start searching.
When
“Antenna” is DVB-C:
1.4 CADTV Manual Tuning
- Press OK or RIGHT navigation button to enter it.
- Use navigation buttons to adjust the Frequency, Symbol
and QAM Type. Then press OK button to start searching.
1.5 Program Edit
- Press OK or RIGHT navigation button to select the menu.
- Press UP/DOWN navigation button to highlight desired
channel.
- Press RED button on remote control to delete highlighted
channel.
- Press YELLOW button on remote control to enter MOVE
mode. Then use UP/DOWN navigation button to select
preferred position and press YELLOW button again to move
it.
- Press BLUE button on remote control to skip highlighted
channel.
- Press FAV button to set current channel as a favorite
channel, and press FAV button again to set it as a normal
channel.
1.7 Signal information (works under available TV signals)
This item is used to display signal details, for example: channel number and strength.
1.8 CI information (works under available TV signals)
When an available CAM (Conditional Access Module) card is connected to the CI slot,
users can view related information or manage the CAM card.