MAKE CERTAIN THAT YOU ARE USING THE
CORRECT TEMPLATE FOR THE HARDWARE BEING
INSTALLED AND YOUR ROUTER HAS A 3/8”
OUTSIDE TEMPLATE GUIDE INSTALLED
IN THE BASE.
GENERAL SAFETY RULES
ALWAYS WEAR EYE AND EAR PROTECTION!!
Before attempting any installation know how to safely use
the power tools involved and how they work. Be sure all
bits and cutters are sharp and in good condition and all
power cords and extension cords are in good working
order and properly grounded.
Always make sure the router comes to a
COMPLETE
STOP
before pulling it away from the template. Failure to
do so may cause damage to your router template, your
work or personal injury.
Always route in a
CLOCKWISE
direction. A
counterclockwise direction will cause the router bit to
climb in the cut and cause an unstable situation.
If you feel you have missed part of the cut,
DO NOT
BACK UP!!
You will be making a clean up pass that will
take care of the problem.
Page 2
